Our Templates

At MAC Templating LTD we provide digitized templates from the Laser Products LT-55-XL. The laser templator has dedicated software measuring distance from the laser and angles from the encoder combined to create to scale CAD drawings.

Book a template

Laser Products LT-55-XL

After the CAD drawings are produced by the Laser Templator, they can instantly be sent to the fabricator/manufacturer with...

  • Improved accuracy
  • No mess involved
  • Reduced overheads
  • Guaranteed satisfaction

The below criteria MUST be met before templating can begin...

Base units must be fixed

Any subsequent movement will invalidate the template.


Any plastering must be completed.


The units should be level to within 3mm.


All hobs, range, sinks & taps etc. must be on site or product spec available to templator.

End panels

All end panels must be on.

Other Materials

All temporary surfaces and appliances must be removed.

Stone worktops are delicate and brittle if not correctly supported. Distances of over 600 mm should be bridged with supports. Overhangs should not exceed 300mm

Final decisions regarding drainage groove direction, flush-mounting of hobs, the use of slips at cut-outs, corner and edge profiles and so forth may be defined at this stage. Please ensure that whoever gives access to the premises has the authority to make decisions on behalf of the customer.

Please do not hesitate to contact us on 07762 590 204 if you have any further queries regarding the templating process.